XT60H Battery Connector Plug
RC Grade | For Drone/Model Aircraft/E-Bike Battery Connection
Body Material: Gold-plated copper
Internal Material: Nylon/PA
Internal Resistance: 0.8mΩ
Max. RC/MC: 60A/100A
Pulling Force/600: 3kg
Temperature Resistance: -20℃~120℃
Recommended Service Cycles: 1000 times
Recommended Cable Spec.: 12AWG
Recommended Soldering Spec.: 480℃/4S
XT60H Battery Connector Plug Specifications
RC Grade XT60H Connector Specifications, Stable Conductive Performance, Suitable for Drones, RC Models, E-Bikes and Lithium Battery Equipment
1. Basic Specifications
Product Name: XT60H Battery Connector Plug
Conductive Contact Material: Gold-plated copper
Insulation Housing Material: Nylon/PA
Internal Resistance: 0.8mΩ
Rated Continuous Current / Max Peak Current: 60A / 100A
Single Piece Weight: 7.72g per piece
Withstand Pulling Force: 3kg
Operating Temperature Range: -20℃ ~ 120℃
Recommended Mating Service Cycles: 1000 times
Matching Wire Specification: 12AWG cable
Standard Soldering Parameter: 480℃, soldering for 4 seconds
2. Key Performance Parameters
Conductivity Performance: Gold-plated copper contact brings only 0.8mΩ low internal resistance, reduces heat generation during high-current power transmission.
Pull Resistance: The connector bears 3kg pulling force effectively, prevents accidental disconnection during RC equipment operation.
Temperature Adaptability: Stable performance within -20℃ to 120℃ temperature range, adapts to outdoor and high-load operating environments.
Service Durability: Supports 1000 times normal plugging and unplugging without loose contact.
Soldering Compatibility: Matches 480℃/4S soldering standard for reliable wire welding connection.
3. Structural Features
Gold-plated Copper Terminal: Excellent electrical conductivity, anti-oxidation, stable large-current transmission.
Nylon PA Shell: High toughness, insulation protection, isolate short circuit risks between positive and negative poles.
Integrated Plug-in Structure: Tight fit after assembly, stable pulling resistance, no loose contact under vibration.
4. Application Scope
Widely used for lithium battery connection of RC drones, model airplanes, model cars, balance cars, small electric bikes, portable power stations and other RC energy storage equipment that need high-current plug connection.
5. Matching Operation Standards
Matching Wire: Must use 12AWG specification cable to match the current load of XT60H plug.
Soldering Operation: Follow 480℃ high temperature for 4 seconds soldering requirement to ensure firm wire and terminal combination.
Service Limit: Do not exceed 1000 times plugging cycles to avoid terminal loosening and increased resistance.
Load Limit: Long-term continuous working current shall not exceed 60A, instantaneous peak current shall not exceed 100A.
